Combi-hammer
HERMAN BX-1200 | SDS-max
1100 W | Warranty: 6 months

Three-position switch of operating modes:
drilling with hammer, mode for adjusting the position of the chisel and hammer without rotation for chopping work

Switch with start-up electronics ensures a soft start of the motor for precise drilling of holes

Variable speed:
with the option of 6-speed selection for optimal peripheral speed of the drill

Carbon brush replacement signaling:
after the LED indicator lights up, there are approx. 8 hours left until replacement

Ergonomic side handle with a rubberized grip surface, removable without tools, adjustable in the range 0-360°:
Allowing you to grip the hammer safely while working and to set a comfortable handle position

Anti-vibration system of the rear handle with a rubberized grip surface significantly reduces the values of vibrations transmitted from the hammer to the hands

The possibility of setting the chisel in 16 positions increases work productivity by appropriately setting the position of flat, bladed and channel chisels

Light alloy gearbox reduces the weight of the hammer

Safety slip clutch:
in the event of a sudden twist of the drill, the clutch disconnects the motor from the gearbox and thus protects the operator from a sudden jerk of the hand

Switch with start-up electronics:
It protects the operator from an immediate engagement moment when drilling continues, especially deep holes of larger diameters

The "POWER CONTROL" function indicates the connection to the electrical network with an LED indicator:
for increased safety, especially when carrying the hammer with your hand near the switch

Double insulation:
increased protection against electric shock

Self-disconnecting carbon brushes:
Protecting the rotor commutator from damage at the end of the life of the carbon brushes

Dust-tight clamping:
a special flexible seal reduces the permeability of dust to the quick-clamping mechanism and thus extends its service life

Safety slip clutch:
in the event of a sharp collision of the drill, the clutch disconnects the motor from the gearbox and protects it from overload

Gearbox made of light alloy:
the material used contains additives that increase resistance to wear

Effective anti-dust system:
reduces the penetration of dust during the intake of cooling air

Specially shaped air inlets:
They increase the efficiency of engine cooling