Screwing

For screws with Pozidriv (PZ) cross-slot in the screw head, 8 variants

For screws with Phillips (PH) cross-slot in the screw head, 8 variants

For screws with Torx (TX or T) hex-shaped slot in the screw head, 18 variants

For screws with flat slot (SL= Slotted) in the screw head, 10 variants

For screws with internal hexagon (inbus) in the screw head, 8 variants

For screwdriving hexagon socket head cap screws (inbus) located in hard to reach places, 5 variants

Set of HERMAN Classic bits : 25x PZ1,2,3/25mm; 10x PZ1,2,3/50mm; 10x PH1,2/50mm; 10x TX15,20,25,30/50mm; 3x bit holder SB-81

Set of HERMAN Classic 25mm bits : 1x PZ0,1,3 PH0,1,3 2x PZ2, PH2

Set of HERMAN Classic 25mm bits : 4x PZ1,2, PH1,2; 2x PZ3,PH3,TX10,15,20,25,30; 1x bit holder SB-80

Set of HERMAN Classic 25mm bits : 7x PZ1,2,3,PH1,2,3,PL4,6,SW4,5,6; 2x TX10,15,20,25,27,30,40; 1x TX with hole 10,15,20,25,27,30,40mm; 2x bit holder

Extended shank, for screws with Pozidriv (PZ) cross slot in the screw head, 2 variants

Extended shank, for screws with Phillips (PH) cross-slot in the screw head, 2 variants

Extended shank, for screws with Torx (TX, T) hexagonal slot in the screw head, 12 variants

For screws with Pozidriv (PZ) cross slot in the screw head, 50mm version, 3 variants

For screws with Phillips (PH) cross-slot in the screw head, 50mm version, 3 variants

For screws with Torx (TX, T) hexagon-shaped slot in the screw head, 50mm version, 6 variants

Set of HERMAN Impact bits: PZ1,2,3,PH1,2,3,TX10,15,20,25,30,40 /25mm/50mm; PH2,PZ2,TX10,15,20,25,30,40 /90mm; SW-10x8,10,12 /50mm; 2x bit holder

For screws with Pozidriv (PZ) cross-slot in the screw head, with anti-slip finish, 6 variants

For screws with Phillips (PH) cross-slot in the screw head, with anti-slip finish, 6 variants

For screws with Torx (TX, T) hexagon-shaped slot in the screw head, 13 variants

With strong permanent magnet. Holds bit and smaller screws securely, 2 variants

With a strong permanent magnet and a ball - after pushing the ball, the bit will automatically slide out, making it easier to replace it

With QuickSystem™ function : quick bit change with just one hand, 2 variants

Quick-release flexible bit holder with up to 20° offset from the screwdriving axis, 1 variant

Allows the use of conventional screwdriving bits with SDS-plus drilling hammers

With mechanical clamping : allows extended reach for bits and drills with 1/4" (SW 6.3mm) shank, 2 variants

With QuickSystem™ function : allows extended reach for bits and drills with 1/4" (SW 6.3mm) shank, 2 variants

Practical, impact-resistant screwdriver of robust construction for bits with a hexagonal 1/4" (6.35mm) shank

With a strong permanent magnet, also suitable for impact screwdrivers. It holds firmly not only the bit, but also smaller screws

With permanent magnet and additional lock to prevent the bit from coming loose, also suitable for impact screwdrivers

A strong permanent magnet in a plastic case holds even larger screws on the tip of the bit

Quickly and reliably magnetizes or demagnetizes objects made of ferrous metals

With strong permanent magnet for soft screwing of nuts and hexagon head screws, 5 variants

For tightening hexagon nuts and hexagon head bolts with impact tighteners, 11 variants

For tightening hexagon nuts and hexagon head bolts with impact tighteners, 11 variants

For tightening hexagon nuts and hexagon head bolts with impact tighteners, 11 sizes

For tightening hexagon nuts and hexagon head bolts with impact tighteners, 11 sizes

Allows the use of ½" socket wrenches in impact drivers with ¼" chuck, 2 variants

For tightening screws in inaccessible places with impact drivers with ½" chucks

For better use of impact drivers with ½" chuck, 3 variants